‌PPGI Synthesis Method

Dec 05, 2024

Leave a message

‌The synthesis method of PPGI (Pre-painted Galvanized Iron) mainly includes the following steps: ‌Substrate preparation‌: First, select a suitable substrate, usually cold-rolled steel sheet or hot-dip galvanized steel sheet. These substrates need to be surface treated to ensure that the coating can adhere firmly to them. ‌Galvanizing‌: The substrate is immersed in molten zinc to form a uniform zinc layer. This step is to prevent the substrate from rusting and improve its corrosion resistance. ‌Coating treatment‌: A layer of primer is applied to the surface of the substrate, which is usually a special resin coating. The selection and coating process of the primer have an important influence on the quality of the final product. ‌Baking and curing‌: The substrate coated with primer is placed in an oven for baking to cure the primer. The baking temperature and time need to be adjusted according to the specific coating and process requirements. ‌Topcoat coating‌: One or more topcoats are applied on top of the primer, usually polyester, polyurethane or other high-performance coatings. The selection and coating process of the topcoat will affect the appearance and performance of the product. ‌ ‌Final baking‌: The substrate coated with topcoat is put into the oven again for final baking to ensure that the topcoat is fully cured. This step is key to ensure the durability and beauty of the coating‌.

‌Application areas of PPGI‌: PPGI is widely used in construction, home appliances, automobiles and other fields. Its corrosion resistance, good formability and diverse surface treatment make it perform well in various applications‌.

Send Inquiry
Send Message