The following points should be noted when storing carbon steel plates and coils:
Surface treatment: Before storage, the surface of carbon steel plates and coils needs to be cleaned and treated to remove oil and other debris on the surface to ensure that the surface is clean and smooth. Polishing, cleaning, spraying rust prevention and other methods can be used to prevent carbon steel from being exposed to the air for a long time and being oxidized and corroded.
Packing method: Plastic bags, wooden boxes, steel coils and other packaging methods can be used. It is important to package after the surface is treated to avoid excessive packaging leading to hypoxia and thus corrosion.
Storage environment control: The storage environment needs to be relatively stable to ensure that the temperature and humidity are within the appropriate range. There should not be too much dust and debris in the storage environment, and it should be kept clean. If the storage time is long, regular inspections are required to ensure that the surface is not rusted or corroded.
Pre-use treatment: The surface needs to be treated again before use to remove rust inhibitors and attachments. If corrosion occurs during storage, it needs to be cleaned and treated in time to avoid affecting use.
Warehouse conditions: The warehouse for storing carbon steel plates needs to be clean, dry and ventilated. Different types of carbon steel plates need to be stacked separately for easy access and management. No corrosive materials such as acid, alkali, salt, cement, etc. can be placed in the warehouse.
Open-air stacking treatment: If it is stacked in the open air, wooden pads or stone strips need to be placed underneath, and the stack surface should be slightly tilted to facilitate drainage.


