Chemical Composition table
|
Element |
Content (Mass Fraction) |
|
C (Carbon) |
≤ 0.12% |
|
Si (Silicon) |
≤ 0.5% |
|
Mn (Manganese) |
≤ 0.6% |
|
P (Phosphorus) |
≤ 0.1% |
|
S (Sulfur) |
≤ 0.045% |
|
Ti (Titanium) |
≤ 0.3% |
Available sizes
|
Length (mm) |
Width (mm) |
Thickness (mm) |
Wave Height (mm) |
Wave Pitch (mm) |
|
1000 - 6000 (Customizable) |
900, 960, 1000, 1200 |
0.4 - 1.2 |
35 - 50 |
180 - 200 |
Zinc Coating
|
Usage Scenarios |
Zinc Layer Recommendation |
|
General environments such as suburban areas in cities |
DX54D+Z100 - Z180 |
|
Coastal areas |
DX54D+Z275 and above |
|
Areas with mild industrial pollution |
DX54D+Z180 - Z275 |
|
Strongly corrosive industrial areas such as chemical and electroplating industries |
DX54D+Z275 and above, consider adding anti-corrosion coatings |
|
Temporary buildings |
DX54D+Z60 - Z100 |
|
Areas with high aesthetic requirements (such as city centers and tourist scenic areas, etc.) |
DX54D galvanized sheets with small spangles or spangle-free, and colored coated sheets can be selected |
Advantages of DX54D
|
Feature |
Benefit |
|
Superior Formability |
High ductility (≥34–38% elongation), deep drawing without cracking |
|
Strong Corrosion Resistance |
Hot-dip galvanized (Z/ZA/AZ coatings), 8× better than standard zinc |
|
Excellent Weldability |
Low carbon (≤0.12%), no preheating required for welding |
|
High-Temperature Resistance |
Aluminum-silicon (AS) coating withstands up to 700°C |
|
Versatile Surface Options |
Chromate, phosphating, epoxy for better paint adhesion & durability |
|
Balanced Strength |
Tensile: 260–370 MPa, Yield: 120–220 MPa – durable yet formable |
Standards System
|
Standard System |
Standard Number |
Corresponding Grade |
|
European Standard (EN) |
EN 10142:2009 |
DX54D |
|
EN 10346:2021 |
DX54D+Z/WI |
|
|
Japanese Standard (JIS) |
JIS G3302:2018 |
SGCD3 |
|
American Standard (ASTM) |
ASTM A653/A653M - 21 |
DDS |
|
ASTM A1008/A1008M - 21 |
DDS |
|
|
Chinese National Standard (GB) |
GB/T 2518 - 2020 |
DX54D |
|
International Standard (ISO) |
ISO 3575:2017 |
FeP04 |
Packaging
|
Component |
Material/Method |
|
Inner Layer |
- Wax paper, plastic film, or PE foam |
|
Outer Layer |
- Corrugated cardboard sheets |
|
Palletization |
- Wooden pallets (treated for moisture resistance) |
|
Corner Protection |
- Cardboard angles or plastic edge protectors |
|
Sealing |
- Adhesive tape, steel clips, or PP straps
|
FAQ
Hot Tags: dx54d corrugated galvanized roofing sheet, China dx54d corrugated galvanized roofing sheet suppliers, corrugated pallet rack unit sheet, corrugated kiosk unit sheet, corrugated wholesale use sheet, corrugated section sheet, waterproof corrugated sheet, corrugated construction use sheet


